Season 1
 |
Season 01 Episode 1TITLE: SSTV 1-01 – How to Change Water Pump and Lower Unit Fluid DESCRIPTION: John Greviskis and Bert Delle take a look on how to change out a water pump and lower unit fluid on a Mercury outboard engine. Many tips are shown for this task as well as finding out where to get after market kits to complete this project. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, change out water pump, water pump, water pump kits, after market kits, lower gear case, gear case oil, gear case lube, changing gear case oil, how to change out water pump
|
|
|
|
|
Season 01 Episode 2TITLE: SSTV 1-02 – Buying A Used Trailer DESCRIPTION: In this half hour, John focuses on trailers… specifically how to search out and purchase used trailers. John will educate trailer boaters on when it is a smart idea when to recondition a used trailer for use, and when it is a total waste of time! A must see episode for those you are in need of a trailer. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, trailers, used trailers, how to purchase a used trailer, trailer reconditioning, buyiing a trailer, replacing couplers, trailer checklist, safety chain, replacing jack, jack kits, replacing wheels, trailer winch, replacing trailer springs, trailer leafs
|
|
|
|
|
Season 01 Episode 3TITLE: SSTV 1-03 – T-Top & Tower Manufacturing DESCRIPTION: John and Bert visit Birdsall Marine Design, one of the world’s leaders in T-Top and Tower design. In this episode, John shows how this company fabricates and installs this useful accessory for a boat. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, T-Top, Boat tower, aluminum tower, Birdsall Marine Design, T-op fabrication, tower fabrication, T-top installation, Aluminum Tower installation, welding, pipe bending |
|
|
|
|
Season 01 Episode 4TITLE: SSTV 1-04 – Installing Air Conditioning DESCRIPTION: Air Conditioning is a MUST in Florida for boats with a cuddy cabin. That’s why John and Bert explore the issue of air conditioning and how to install it on a 29′ Luhrs. Many COOL topics are discussed here including water cooled air conditioning units and internal strainers. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, air conditioning, cuddy cabins, Florida heat, A/C units, water cooler A/C, internal strainers, Ocean Marine, 29′ Luhrs, how to install air conditioning |
|
|
|
|
Season 01 Episode 5TITLE: SSTV 1-05 – How to Properly Install A VHF Radio DESCRIPTION: Perhaps one of the most overlooked important topics in boating… Your VHF Radio. In this show John and Bert will demonstrate how to properly select and install a VHF radio into the boat. Installation will include how to mount a radio so that it always within reach and protected from the elements. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, how to install a VHF radio, vhf radio, installing a VHF radio, selecting a VHF radio, mounting VHF radio, water VHF radios, electronics box, installing VHF antenna, VHF antenna |
|
|
|
|
Season 01 Episode 6TITLE:SSTV 1-06 – Searching Out a Ship Shape TV Project Boat DESCRIPTION In this informative episode, John and Bert search out the next Ship Shape TV project boat for use on the show. A variety of boats are looked at and, let’s face it, some of them are pretty rough looking. John teaches boaters what to look for when buying a boat that needs some work! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episode
KEYWORDS/ TAGS: Ship Shape TV, John Greviskis, project boat, how to purchase a project boat, surveying a boat, salvaging boat parts, used boats |
|
|
|
|
Season 01 Episode 7TITLE: SSTV 1-07 – Replacing A Steering Cable & Helm DESCRIPTION On an older boat originally built back in 1978, the steering system leans to the right when driving. So it is time to completely replace the steering cables and helm for this boat… and John and Bert will show you how! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, steering cable, helm, steering helm, replacing steering cables, replacing helm steering, Teleflex, throttle shift cable, steering wheel |
|
|
|
|
Season 01 Episode 8TITLE: SSTV 1-08 – Installing Gauges DESCRIPTION: In this engaging episode, John and Bert walk boaters through how to properly install all their gauges.. especially a tachometer and a fuel gauge. Many tips are discussed here so you may want to take notes! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, gauges, how to install gauges, tachometer, fuel gauge, wiring, testing gauges, 12-volt wiring, sending unit, battery |
|
|
|
|
Season 01 Episode 9TITLE: SSTV 1-09 – Transporting & Stripping A Newly Purchased Used Boat DESCRIPTION: John and Bert have chosen the new project boat… A 1984 18′ Ranken Bow Rail. In this episode, John and Bert must transport the trailer off the Jacks and onto a trailer. Then Bert will take apart eh current engine and see if there is anything worth salvaging there. Also… John will strip off all the bad unusable parts and get the boat ready to be Ship Shaped! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, boat jacks, transporting used boat, stripping boat parts, disassembling engine, engine corrosion, boat transport, boat hook-up |
|
|
|
|
Season 01 Episode 10TITLE: SSTV 1-10 – Installing A Bonding System/Preventing Galvanic Corrosion DESCRIPTION: When a boat is victim of an electric current in the water, electrolysis occurs causing major galvanic corrosion of metal on the boat… If this happens to frequently on a boat… Look Out… Sunken ship! In this half hour John explains the importance of installing a bonding system to a boat. He will go over sacrificial anodes, lightening protection, and the importance of a galvanic isolator. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, galvanic corrosion, installing Bonding System, measuring water voltage, electrolysis, galvanic isolator, sacrificial anodes, installing anodes, metal deterioration
|
|
|
|
|
Season 01 Episode 11TITLE: SSTV 1-11 -How To Install Trim Tabs DESCRIPTION: On this episode,, John and Bert go over installing trim tabs on a Seahawk,. John looks at a pair of electric trim tabs at Boat Owners Warehouse. Then Bert will take boaters step by step on how to install those tabs. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, trim tabs, electric trim tabs, installing trim tabs, drilling holes, sealant, where to figure trim tab placement, installing trim tab motor, installing trim tab switches |
|
|
|
|
Season 01 Episode 12TITLE: SSTV 1-12 – How To Remove a Corroded Engine & Rotted Wood DESCRIPTION: With the new project boat in yard, Bert continues the process of checking for any way that the engine can be re-used. However the engine proves to be too corroded and Bert decides to completely remove it from the craft. While on the boat, John and Bert decide to remove traces of rotted wood in the bilge and under the carpet. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, salvaging engine, removing engine, rotted wood, corroded engine, checking boat for damage, removing rotted wood from boat |
|
|
|
|
Season 01 Episode 13TITLE: SSTV 1-13 – How To Install An Aluminum Tower DESCRIPTION: This episode of Ship Shape TV Deals with the installation of a tower on a 29′ Blackfin. John will show you how to pick out a tower that is right for your boat, how to measure it in your boat correctly, and finally how to put the boat accessory in. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, aluminum tower, tower fabrication, tower placement, tower installation |
|
|
|
|
Season 01 Episode 14TITLE: SSTV 1-14 – How to Install A Canvas Enclosure/Boat Stains DESCRIPTION: In this informative episode of Ship Shape TV, John will be showing boaters how to install a marine canvas enclosure in order to protect the cock pit area from dirt… and provide decent shade. He also will be inviting a professional boat detailer to guide you through your bright work. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episode |
|
|
|
|
Season 01 Episode 15TITLE: SSTV 1-15 – How To Install A Smaller Outboard To a Small Boat/Steering & Controls DESCRIPTION: This episode dives into the aspect of installing a small outboard to an ACB. John will thoroughly go look into all the options for steering and controls. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, canvas enclosure, marine canvas, boat detailing, bright work, boat stains |
|
|
|
|
Season 01 Episode 16TITLE: SSTV 1-16 – How to Replace Exhaust Manifolds & Risers DESCRIPTION: Get yourself a paper and pencil and watch this amazing episode dealing with replacing corroded exhaust manifolds and risers on your engines. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, exhaust manifolds, risers, overheating, metal corrosion |
|
|
|
|
Season 01 Episode 17TITLE: SSTV 1-17 – A look Into Seating DESCRIPTION: John is unhappy with the plastic seating in his ACB project boat and will make some changes to it. In this half hour John looks into the different types of seating that are available for his boats and will show boaters how to install them into their crafts. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, seating, switching seats, seat pedestals, seat bases, backing plates, choosing seats |
|
|
|
|
Season 01 Episode 18TITLE: SSTV 1-18 – How To Install Bilge Pump DESCRIPTION: In this exciting episode of Ship Shape TV, John and Bert show boaters how to check their bilge pumps for leakage. They also look into what is new in bilge pumps and will take you step by step on how to install one. . Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, bilge pumps, checking bilge pumps, leaking bilge pumps, broken bilge pumps, installing bilge pumps |
|
|
|
|
Season 01 Episode 19TITLE: SSTV 1-19 – Looking Into Transmissions In Larger Boats DESCRIPTION: This episode is packed with information about transmissions on large boats… specifically the Pleasure Lock Trolling System… which allows you to enhance your trolling speed at idle. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transmissions, boat transmissions, pleasure lock trolling system, fishing, trolling, trolling at idle, trolling speeds, trolling valve, hydraulic transmission |
|
|
|
|
Season 01 Episode 20TITLE: SSTV 1-20 – How to Replace Your Faulty Controls DESCRIPTION: This half hour John takes a look at your controls on your boat and what to do when they are on the blink. Bert and john will look into new types of controls and, of course, show you how to replace your current set with new ones. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, faulty controls, controls, throttle cables, replacing control cables, helm |
|
|
|
|
Season 01 Episode 21TITLE: SSTV 1-21 – Choosing The Proper Propeller For Your Boat DESCRIPTION: Many people think they may have many issues with their boat if the boat doesn’t have enough speed or cannot get up on plane fast enough… however it usually has to do with a prop that is not right for your boat. In this episode, John and Bert discuss the issue of choosing the proper propeller that is right for your boat! For more episodes visit: Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, prop testing, props, hole shot, speed test, torque, prop installation |
|
|
|
|
Season 01 Episode 22TITLE: SSTV 1-22 – Boat Lifts DESCRIPTION: On this show of Ship Shape TV, John will look into Davits, Marine Elevators, and cradle lifts. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, boat lifts, davits, marine elevators, cradle lifts, installing boat lift, choosing boat lift |
|
|
|
|
Season 01 Episode 23TITLE: SSTV 1-23 – Defever Yacht Rendezvous DESCRIPTION: A break in the action as John visits Defever Yachts and gets involved with their yearly rendezvous. Defever Yacht owners are visited and their will be a complete introspective into the luxury boat. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, Defever Yachts, Yachts, Defever yacht Rendezvous, Yacht ownership, luxury boats |
|
|
|
|
Season 01 Episode 24TITLE: SSTV 1-24 – The GPS DESCRIPTION: In this episode, john and Bert take a look into the GPS… How it works… the new models… and what to look for when purchasing one. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, GPS, antenna, how to purchase a GPS, how does a GPS work |
|
|
|
|
Season 01 Episode 25TITLE:SSTV 1-25 – How To Install A Bow Thruster DESCRIPTION: For you Big Vessel owners.. John will go over the procedure and importance of putting in a bow thruster. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, bow thruster, docking, installing bow thruster, yacht, 65′ boat, boat control, steering boat |
|
|
|
|
Season 01 Episode 26TITLE: SSTV 1-26 – New Boat technologies and Gadgets DESCRIPTION: John and Bert bring the excitement of the Miami International Boat Show to boaters and feature many new gadgets and technologies in boating. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, boat show, marine gadgets, marine technology |
|
|
|
|
Season 01 Episode 27TITLE: SSTV 1-27 – Outdrive to Outboard Conversion DESCRIPTION: Want to convert your engine and outdrive motor system into an outboard? How about an engine bracket? Well in this informative show, John will teach you how to completely convert your transom so an outboard motor and bracket are possible. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, outdrive conversion, outboard motor, how to convert your outdrive into an outboard, transom, transom restructure, engine removal, outboard installation, 1978 Stamos |
|
|
|
|
Season 01 Episode 28TITLE: SSTV 01-28 – Filling In a Transom DESCRIPTION: In part 2 of the 1978 Stamos Outdrive to outboard conversion process, the transom will now be filled in after the old outdrive boot left a gaping hole to be dealt with. A plywood core is made with fiberglass to be used as coring material. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom, wood coring, fiberglass, cutting, sanding, how to enclose your transom, outdrive to outboard conversion |
|
|
|
|
Season 01 Episode 29TITLE: SSTV 01-29 – Transom Plug DESCRIPTION: In Part 3 of the Stamos engine conversion, John is going to install a plug that was made to fill in the transom where a gaping hole was made when the outdrive engine was removed. In this show, John will show you the different types of fiberglass that will be used, as well as the epoxy resin, when he demonstrates a fiberglass lay up. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom plug, outdrive to outboard conversion, fiberglass lay up, transom plug installation, fiberglass, structural fiberglass, epoxy resin, coring |
|
|
|
|
Season 01 Episode 30TITLE: SSTV 01-30 – Wiring Tips DESCRIPTION: In this Electrical episode, John and Nick share some unique tips on how boaters can do their own 12 -volt wiring on the boat. They will get into switches, ground blocks, and terminal blocks… making the boater’s wiring task as easy as pie. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, wiring, wiring tips, 12-volt wiring, how to wire your boat, pvc pipe, wire way, terminal blocks, ground blocks, re-wiring, boat accessories, batteries |
|
|
|
|
Season 01 Episode 31TITLE: SSTV 01-31 – Gunwale Cap Repair/New Rub Rail DESCRIPTION: After John’s project boat flipped on the highway, it loosened the gunwale cap. Now John has to repair that and after he is done sealing the repair with some 3M and trough bolts, it will be time to install some new rub rail! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, gunwale cap repair, 3M sealant, trough bolts, rub rail, new rub rail, rub rail installation, flexible rub rail |
|
|
|
|
Season 01 Episode 32TITLE: SSTV 01-32 – Installing Transom Plate/Blister Repair DESCRIPTION: On the Pursuit project boat, John and Nick need to repair a transom by removing blisters, and filling in any holes and cracks.. They need to finish this before they can move on to the meat of the show… installing a transom plate; which will increase the strength of the transom in order to add an additional engine eventually. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, pursuit, transom, transom repair, blister repair, osmotic blisters, filling in transom, filling in transom holes, transom plate, transom mounted transducer |
|
|
|
|
Season 01 Episode 33TITLE: SSTV 01-33 -Hanging a Transom Bracket DESCRIPTION: Nick and John will be visiting a manufacturing facility where they make Transom Brackets. Then afterwards, they will demonstrate how to actually hang one on to the boat. Get ready for an awesome show! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom bracket, factory tour, how to hang a transom bracket, hanging transom bracket, fairing transom, sanding, fairing, primer, paint, drilling |
|
|
|
|
Season 01 Episode 34TITLE: SSTV 01-34 – Trim Tabs/Boot Stripe DESCRIPTION: After installing a custom transom plate to the back of a project boat, John and Nick decide to look into installing some trim tabs. A great deal of time is spent on the proper measuring and placement of these actuating trim tabs… proper mounting is crucial here. Then, for a sporty look, John does a step by step instruction on how to give a boat a boot stripe. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom plate, trim tabs, trim tab installation, actuators, boot stripe, measuring for trim tabs, mounting actuators |
|
|
|
|
Season 01 Episode 35TITLE: SSTV 1-35 – Fuel Fill Hose/3 Battery System DESCRIPTION: After installing a brand new Fuel tank on a project, it is now time to get into fuel fill hose and vent hose. John will install these new hose and totally revamp the fuel system from the tank back to the engines. Then they will switch gears and install an isolated 3 battery system. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, fuel tank, fuel hose, fuel vent hose, fuel fill hose, how to revamp a fuel system, hooking up hose, isolated 3 battery system, battery, shut off valve, wiring |
|
|
|
|
Season 01 Episode 36TITLE: SSTV 1-36 – How To Re-Carpet Bunks DESCRIPTION: In this episode of Ship Shape TV, John compares the various products that make bright work easier on your boat. Then it’s all about the trailers as he re-carpets trailer bunks, installs guide poles, and introduces us to a Posi-latch. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, bright work, waxing, buffing, metal polish, trailer bunks, carpeting bunks, guide poles, posi-latch, Mediterranean mooring |
|
|
|
|
Season 01 Episode 37TITLE: SSTV 1-37 – Re-Coring Bulkheads DESCRIPTION: In an effort to strengthen his boat with better core materials, John is switching out the wood in his bulkheads for composite material. He will also continue the work on a transom by tying up a couple of knees. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, re-coring, re-coring bulkhead, composite material, perforated, contour core material, vacuum bagging, fiberglass, resin |
|
|
|
|
Season 01 Episode 38TITLE: SSTV 01-38 – Marine Air Conditioning DESCRIPTION: In this episode of Ship Shape TV, John, along with a guest, show boater’s the advantages of having air conditioning in their cabins. Many types of air conditioning units are discussed. Also demonstrated are ways to hook up shore power to your boat. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, shore power, marine air conditioning, air conditioning units, A/C, cabin temperature, air conditioning installation, A/C install |
|
|
|
|
Season 01 Episode 39TITLE: SSTV 01-39 -Hydraulic Steering System/Powder Coating Accessories DESCRIPTION: In this half hour, John will be hanging some new twin engines to the transom of a project. But that’s not it, cause he will introduce a hydraulic steering system made by Teleflex. He will show boaters how to install and bleed this system for use. Then he will install some new powder coated accessories to the boat… and if you don’t know about powder coating… then, never fear… John will take you to a factory that will explain it all! Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, hanging twin engines, Teleflex Steering, steering install, bleeding steering, powder coating accessories, factory tour, powder coating manufacturing, how to bleed hydraulic steering, Ship Shape TV |
|
|
|
|
Season 01 Episode 40TITLE: SSTV 01-40 – Oil Changing System DESCRIPTION: On a 200hp Diesel Motor, John and Nick install an oil changing system suggested by an expert. In this half hour, boater’s will learn about all the various types of oils that are out there for a variety of boats to lessen the confusion. Then stick around you high performance boaters, because John will check the oils and fluids on a Cigarette style Top Gun. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, 200hp volva penta, changing oil, diesel engine, marine grade oil, outboard oil, checking oil, checking fluids, Top Gun, cigarette boat, high performance boat, oil changing system |
|
|
|
|
Season 02 Episode 41TITLE: SSTV 01-41 – Prop Testing for Counter Rotating Outboards DESCRIPTION: We visit John at the Mercury Testing Facility where he is testing various props out to find out exactly what he wants for a pair of counter rotating engines on his 1982 Pursuit. A wide range of testing is done from speed to hole shot.
Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, prop testing, props, hole shot, speed test, torque, prop installation, mercury outboards, how to test out your props, prop selection |
|
|
|
|
Season 01 Episode 42TITLE: SSTV 01-42 – Fresh Water & Salt Water Systems DESCRIPTION: Getting water into your boat is what this episode is all about. This half hour John installs a fresh water system on the 1978 Stamos… then Johh will be installing a salt water wash down on another boat as well as learn how to actually make one! Then John will be installing a Galley Made mini 100 gallon per day water maker on 1966 Hatteras 34′ convertible. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, water tank, aluminum tank, installing fresh water tank, fresh water system, salt water wash down, making salt water wash down, 100 gallon water maker, showers, 34′ hatteras, flow jet |
|
|
|
|
Season 01 Episode 43TITLE: SSTV 1-43 Oil Changing System DESCRIPTION: On a 200hp Diesel Motor, John and Nick install an oil changing system suggested by an expert. In this half hour, boater’s will learn about all the various types of oils that are out there for a variety of boats to lessen the confusion. Then stick around you high performance boaters, because John will check the oils and fluids on a Cigarette style Top Gun. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, 200hp volva penta, changing oil, diesel engine, marine grade oil, outboard oil, checking oil, checking fluids, Top Gun, cigarette boat, high performance boat, oil changing system
|
|
|
|
|
Season 01 Episode 44TITLE: SSTV 01-44 – Detailing Your Boat DESCRIPTION: In this episode of Ship Shape John brings in a professional detailer to discuss the proper ways to wash down your boat after its been in salt water. Find out what products work best, some tricks of the trade, how to remove mildew, as well as how to clean your isinglass. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, detailing boat, washing boat, salt erosion, mildew, detailing tips, isinglass cleaning, metal polishing, rubbing compounds, hull cleaning, teak wood cleaner, removing stains from vinyl, removing mold from vinyl seats |
|
|
|
|
Season 01 Episode 45TITLE: SSTV 01-45 – Marine Electronics DESCRIPTION: This show is about marine electronics. John will show you a step by step procedure to mounting a GPS, VHF radio, and a fish finder. He, along with a marine specialist from Boating World, will show boaters how to interface these special electronic components. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, marine electronics, mounting GPS, mounting fish finder, mounting VHF radio, interfacing electronics, Boater’s World, How to interface your various marine electronics |
|
|
|
|
Season 01 Episode 46TITLE: SSTV 1-46 – How To Glass In A Transom DESCRIPTION: John and his crew enclose a transom on this episode and show us all the materials needed to do the job. Also. John investigates marine canvas on another boat as well as demonstrates how we can remove those nasty rust stains. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom, glassing in transom, fiberglass, resin, epoxy, marine canvas, installing canvas, removing rust stains, rust stains, anchoring |
|
|
|
|
Season 01 Episode 47TITLE: SSTV 1-47 – Selecting A Generator For Your Boat DESCRIPTION: Back at RPM Diesel Engine Company, John would like to discuss the generators. he will get into the function of the generator and go over terms like wattage, voltage, amperage, cycles, and droop. He we also talk about what generator is right for your boat… and how to maintain them. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, generator, generators, maintaining generators, selecting generator, wattage, amperage, cycles, droop control |
|
|
|
|
Season 01 Episode 48TITLE: SSTV 1-48 – Boot Stripe/Gel Coat Repair/Non-Skid Deck DESCRIPTION: John is busy in this half hour of Ship Shape TV creating a boot stripe for one of his Stamos project boat. Then its back on the Bertram Moppy where he is finishing up a gel coat repair by applying primer and finish coats to the vessel. He then switches gears and discusses the art of creating non-skid for a deck. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, boot stripe, hi build primer, gel coat repair, finish paint, blending finish coat, non-skid deck, paint non-skid |
|
|
|
|
Season 01 Episode 49TITLE: SSTV 1-49 – Safely Removing Decals/Installing Bilge Pump DESCRIPTION: John is having problems removing the decals off a boat because it is greatly cutting into the gel coat. Well have no fear, John has a solution to this problem as well as many tips for removing those decals off of any boat. He also has a solution for the ghosting that is associated with removing old decals. Then he will install a bilge pump on another project boat. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, removing decals, decal removal, ghosting problems, installing bilge pump, buffing wheel, sanding, sander |
|
|
|
|
Season 01 Episode 50TITLE: SSTV 1-50 -Installing Engine Bracket DESCRIPTION: With the mounting advantages of having a bracket on the back of a boat increasing with time, John and Bert install an Armstrong Aluminum engine bracket to the back of their Whitewater project boat. Armstrong Nautical Products, where engine brackets are made, is visited… and those who watch this episode will get an in-depth treat as to how brackets engine brackets are fabricated. Click here to subscribe for FULL ACCESS of Ship Shape TVClick here to subscribe to this episodeKEYWORDS/ TAGS: Ship Shape TV, John Greviskis, transom bracket, engine bracket, engine bracket installation, engine bracket fabrication, Armstrong Nautical Products. Factory Tour, welding, metal fabrication, spray painting bracket, floating ladder, insulated fish box |
|
|
|